đ§ Inflate like a proâlock, adapt, and roll with confidence!
The LUMITECO 20'' Tire Inflator Hose Adapter features a lock-on air chuck with a 90-degree thumb press for a secure, leak-free connection. It includes Presta and Schrader valve adapters plus converting nuts, making it compatible with most bike, motorcycle, car, and truck tires. Constructed from corrosion-resistant metal and reinforced with a durable nylon-wrapped rubber hose, this adapter offers flexible reach and long-lasting performance for both commercial and home use.
Manufacturer | LUMITECO |
Brand | LUMITECO |
Item Weight | 3.52 ounces |
Product Dimensions | 3.94 x 3.94 x 3.94 inches |
Country of Origin | China |
Manufacturer Part Number | LTAC111A |
R**R
Replacement hose works well on old tire pump
The valve that connects to the tire stem broke on my old pump. A shame to throw it away when rest of it was good. I ordered this product and found that one of the three threaded adapters was the correct size for my pump. Works great now. The adapters are the following sizes which isn't spelled out in the specs: 8 mm and 20-22 tpi., 8 mm and 32 tpi., 6 mm and 26 tpi. This is for the male thread that goes into the pump.
H**Y
MUST HAVE FOR MOTORCYCLE OWNERS
I ride a 2018 H-D Street Glide Special. I wanted an easier way to add air to my tires since motorcycle valve stems are a pain to access on most touring style motorcycles. Between the saddlebags, brake rotors, and exhaust pipes, finding the valve stems is only half the battle. Once you manage to find the valve stems, then you need to figure out a way to get your valve stems to cooperate with your air chuck and try not to lose more air from the tires than you are able to add. As with most things, when I get sick of fighting with something long enough, I decide to look for a better solution. After extensive searching I stumbled upon the 90-degree locking air chuck from several different manufacturers on Amazon. I knew that's what I wanted, but I didn't want to buy a new tire gauge (since I just bought one several months ago) and I was a bit confused by the other end of these hoses which showed they would not connect to standard air compressor. I have a small pancake compressor with 50-ft hose reel that I use for filling my tires at home. I wanted something that I could use with my existing setup. If you are searching for the same thing, then keep reading. So, after lots of searching I stumbled upon this 31" extension hose with locking 90-degree chuck. I decided to make the purchase and would just return if it didn't do what I needed it to do. Thankfully, it's perfect. So, let's start with some information you need to know. This hose does not stop air from passing through whether or not the chuck is open, closed, on a tire or off...it does not matter. There is no needle to stop air on the non-chuck side, so if you hook this up to your tire, and don't have the other end attached to an air compressor, your tires will deflate. If you look at my attached pictures, in order for this to work with a standard air compressor (not the portable ones that plug into a cigarette lighter) you will need to have a tire gauge with a tire chuck that attaches to the valve stem and stays in place without you holding it. If your current setup has an air chuck that requires you to maintain pressure to fill a tire, you will need to upgrade that first. As I mentioned before, the valve-stem end of this hose needs to lock into place onto your existing tire filler. The one in the picture was purchased from Amazon just a few months back and is way better than the old Harbor Freight ones that I'd used for years (no more leaks). Lock the hose onto your existing tire filler, then clamp the 90-degree chuck onto your tire valve stem and everything seals tightly. Add air as needed and then unlock the chuck and pull off the tire stem when you are done. The 31" hose is great for moving the tire gauge around to see the pressure in your tires. Other sellers have hoses that are 9" or so...trust me, get this longer one...you won't be disappointed with the versatility it gives you. So, there you have it. If you have a motorcycle (or any hard to reach valve stems on your vehicles) this is the solution. This information would have made my decision much easier so I'm hoping it will help someone else, too. As for the quality, the hose seems well made. Durability will be tested over time, but I'm happy with the functionality and initial quality.
J**Z
Muy bueno
Muy bueno
M**L
Ok
Ok
B**Z
Pump parts
Good product
C**1
Extremely satisfied.
This will work on a Ridgid tire inflater.
R**R
NOT a standard tire fill size fitting. Check before buying.
While this is a well made hose extension IT IS NOT for regular US air hose end. The threaded end of the hose is the same size as a inflation stem on a tire. This appears to be an exetension for a hose that has an old style threaded end used to screw onto a tire valve stem.I wasn't too worried because it comes with two adapters but they are not standard thread sizes that are made to interface with a common size air hose fitting. I even tried to find an adapter based on the threaded size of the hose but this is aparaently very uncommon.If you want an extension of a tire hose with a threaded end this will probably work;If you are looking for a replacement hose for a typical compressed air tire filling valve/guage this will likely not work.
G**S
its works
get what you ordered
Trustpilot
3 weeks ago
2 days ago