VCELINK Tool-Free RJ45 Connectors Toolless Cat6 Modular Plug Gold Plated Cat6 Ethernet Cable Ends for 23-26 AWG Network Cable 4 Pack Black

Been having bad connection problems with my wyrestorm hdmi extension that goes through the wall. Figured I'd try this out and see if it was due to the end being over bent. Otherwise it would mean buying a new cable and refeeding through the wall again!Good thing I got these, as it was exactly that. Wasn't too much issue after figuring out what layout my cat 6 was. Took all of 20 minutes to fit (most of that was double checking myself). Great product, very easy to use and makes the connector and cable stronger so no more over bending.

Worked perfectly. Installed easily. I accidentally pulled the rj45 connector off of a 50m armoured CAT6 cable, once I figured out the wiring was T568B, I followed the wiring images on the connector. The kit comes with no instructions, but simply following the A or B guide and trimming the wires flush with the white connector worked perfectly. Coupled with same day delivery, I’m back up and running! Should also mention I’ve never done this before and did a lot of googling, found this image online which helped me figure out what I needed to do (both ends need to match).

Did the job.However these don’t “Click in” to the devices and can come out quite easily.Keep out of the way of connected devices and your all good.

Anint used yet but they look good quality and easy to use

I gave this product 5 stars as I was not sure about what to put, as I could not get them to pierce my cat 5 cable.This is advertised as cat 6 and 5e compatible but I didn't check what wire I had installed. The backstory is : I run a cable from our house down the garden to a cabin we built 15 years ago. Back then, I just bought the cable and the connecters along with a very cheap tool to crimp them. I never could get the connection working. As it turned out, I never needed the internet in the cabin.I5 years on, for some strange reason I decided to try again. Things had moved on, and you could purchase connecters without the need for a crimper.I connected them to the cable easily enough. They seem like a very good product problem is they just don't really pierce the cable very well at all. I'm assuming this is because the cat 5 cable is to thin and probably not the best quality. I don't want to give bad feedback as I assume it is my fault.

Good product, excellent for larger strand patch lead.

I'm in the process of replacing my home's network cables and I wanted an easier solution to terminating the cable. I find the standard RJ45 connectors a bit fiddly as you have to cut the wires precisely and ensuring the wires don't get mixed up when inserting them into the connector can be a hassle. So, I bought four of these VCELINK Tool-Free RJ45 Connectors, I wish I'd bought a pair of the VCELiNK Precision Flush Cutters at the same time as well. My first attempts to assemble the connector were made difficult by trying to cut the wires with a pair of scissors. I just couldn't achieve a flush fit in the loading clock so the block wouldn't locate in the main body properly. After buying a pair of the VCELiNK flush cutters it was a piece of cake. The connector has the IDC type connections where the wires are forced into V shaped metal contacts which slice through the wire's insulation to make contact. I did find I was unable to push the loading block fully home by just holding it and using my thumb but, by putting it onto a firm surface and applying downward pressure the block snapped into place. I then confirmed that the cable was working with a cable tester. These connectors are big compared to standard RJ45 plugs so, if space is tight, for instance inside a device, they may not be suitable. Another advantage is that they are reusable too. I'm very happy with these tool free connectors and will buy them again.

The assembly of components is really neat and impressive once you click everything together, but I've noticed a bad flaw with the terminal contacts (the V shape which pierces the insulation).These contacts are extremely flimsy, and its highly possible that in some cases the terminal doesn't pierce the insulation to make good contact.I was unlucky enough to experience this on the first try, but I actually found the problematic terminal upon inspection and managed to bend it back into a working position.Great idea, and when it works it's impressive, but my gut is telling me to buy a good expensive crimp tool and quality rj45 connectors instead. And it's what I'm going to do next payday.Pros: impressive design, neat assembly, secure clamping of rj45 connector with rear twisting lock mechanism.Cons: expensive for what they are, weak V terminal that doesn't always pierce the insulation fully, this causes you to be unsure about the contact with wire body.