Qpro Washing Machine & Tumble Dryer Universal Stacking Shelf Kit 60x60cm + Anti Vibration Feet

Very pleased with the quality of this stacking shelf kit. Extremely easy to fit but you will need two people to lift the dryer into position.I found putting the ratchet on the strap less obtrusive on top of the machine as opposed to the side as illustrated.My only issue was the use of the supplied anti vibration pads for under the washing machine feet. When I put these in place the washing machine (& dryer) vibrated “severely” when on the spin cycle - even though on a solid, very level garage floor. My washing machine is perfectly level and has recent brand new shock absorbers fitted so initially this concerned me as my machine sensed the vibration and reduced the spin speed dramatically. I can only assume the rubber is too soft allowing the machine enough movement as to cause vibration when on a spin cycle. Perhaps they are necessary if your machine is on a suspended floor.After removing the anti vibration pads the machine was rock solid, virtually silent and has no vibration whatsoever.Despite this I would highly recommend this stacking kit, it is well made and the pull out shelf is a useful addition.

This product is a total game changer!!! I was sceptical at first, but do not hesitate with this product, it works perfectly! Easier than it looks to install, does not need to be mounted to a wall, sturdy, doesn’t shake/overly vibrate. It’s safe and secure and the pull out shelf is a bonus as it’s really strong.

I stacked a heavy 60 * 60 Miele tumble drier onto a 60 wide by 50 deep hoover washing machine. It has worked and is adequately secure.The stacking tray is quite expensive at £40 however competitor products also seemed to be expensive which I couldn’t really understand for such a cheap-to-manufacture item.The sliding plastic tray is quite noisy and prone to stick and also flimsy feeling and on my setup it blocks about half of the detergent tray on my washing machine because it overhangs which means it’s difficult to get powder into the small gap left accessible. This is only because my washing machine is only 50cm deep - had it been 70cm deep the overhang would be negligible.The included ratcheting nylon strap is necessary and not difficult to use and I also used the included washing machine rubber feet which I think have made a difference in damping the movement of the machine.You have to stick the sticky foam feet pads on yourself for some reason.

Does the job, cheaper than other options and exactly the same as far as I can tell. I’ve done many loads of washing and it’s standing firm.

shelf and plenty of space around you too, I'd also plug in the dryer before placing on shelf as its really heavy and awkward to do afterwards. Great once in place but not the easiest of things to do. Check your dryers weight before purchasing.

Very easy to put mount my large (heavy) tumble drier onto my washing machine. Mine were both Samsung larger capacity machines. You have the ratchet straps around it all to secure it all together. But make sure your washing machine is level with a spirit level before putting the tumble drier on. Also put the ratchet straps under the washing machine before you put the tumble drier on top. The hardest part was keeping my machine feet on the rubber feet supplied in the kit. Once you got that right. It works like a treat. Before you start to put the ratchet straps under the washing machine, make sure you look at the picture with the instructions to ensure you have the ratchet facing the right way. But as you can see. With my washing machine. The staking kit doesn’t stop access to the detergent drawer. But if you have a condenser dryer I would highly recommend connecting the water waste hose to the main water outlet at the back. Otherwise it is quite high up to empty the water from the top of the tumble dryer

This works. It seems quite sturdy. I've used it to stack two freezers on top of each other. They feel very stable.I'm docking it a point because the instructions that come with it are frustratingly useless - in fact they seem designed to slow you down or make you do things in the most awkward order. There's no real detail either - if you can work out which way round to thread the strapping through the crank that tightens everything up based on the instructions given here then you're a better man than me (it's not hard, a bit of trial and error sorted it out, there's just no way you can see what to do using the pictures in the booklet).

Fits my Miele washing machine and tumble dryer very well and gives you somewhere to fold your dry washing