GEEETECH3D Printer PLA Filament 1.75mm Wood Rosewood, 3D Printing Filament PLA 1KG 1 Spool

The media could not be loaded.  Great wood filament. Very dark and the appearance is great. Perfect match for IKEA dark wood stain. Prints easily and adhesion is great too. Only thing, it’s a bit brittle to be careful on handling and recommend using a filament runout sensor as it could save some wasted prints.

I am very satisfied with this black PLA filament. It is high-quality and consistent, and it works well with my Ender 3 neo. It prints smoothly and accurately, and it has a nice finish. The black colour is deep and uniform, and it does not fade or change with temperature. The filament is easy to load and unload, and it has not clogged or jammed the nozzle. It also has good adhesion and durability, and it does not warp or crack. The filament comes in a vacuum-sealed bag with a desiccant pack to keep it dry and fresh. The spool is well-wound and has a hole to secure the end of the filament. The spool also has a label with the weight, diameter, and recommended printing settings. The filament is compatible with most common desktop 3D printers that use 1.75 mm diameter filament. It is also eco-friendly and biodegradable, as it is made from plant-based materials. I highly recommend this black PLA filament to anyone who wants to print high-quality 3D objects in black colour. It is a great value for money and a reliable product.

I recently purchased the Geeetech Marble PLA Filament for my Ender 3 3D printer, and I must say I am thoroughly impressed with the results. The filament is of high quality, and the marble effect it creates on my prints is stunning.The filament is easy to work with and has a consistent diameter of 1.75mm. It adheres well to the print bed and has minimal warping, resulting in clean and precise prints.I have printed various models using this filament, from small figurines to larger functional objects, and the results have always been impressive. The marble effect adds an extra layer of sophistication to my prints, making them stand out from the standard solid color prints.Overall, I highly recommend the Geeetech Marble PLA Filament to anyone looking for a high-quality filament that produces stunning prints. It is definitely worth the investment and has become my go-to filament for all my 3D printing needs.

Weight upon delivery: 1.15kg total (spool and filament)3D printers usedEnder 3 Pro heavily modifiedEnder 3 V2 heavily modifiedCreality CR10 Smart basic modifiedFirst out of the box print Impressions:First print was a vase, a keyring and a 3D sloth. Settings used were 215C for my Nozzle and 70C for first layer then 60C for the bed using a combination of mirror and glass. The first layer adhered well to the the various bed configuration, no glue's needed this was my own personal experience based on my own Gcode and slicer setup. At 60mm/s speed there were no major problems with adhesion.As with all the the prints my setups only had a small brim no support for the large overhangs. The PLA performed well with these. There are very few surface blemishes which I would expect from probably my esteps rather than this PLA.Active Print Impressions:The colour i chose was black and at 1.75 random checks showed very minor variations and the colour appears to be consistent throughout the entire roll. But until I use up the whole roll up I won't be able to confirm that, however.After the print had finished i had no issues removing the items from the various bed surfaces, I was rather pleased with my finished product, I've only been printing since December 2021 and no professional by any standards, The print settings could be tinkered with if I'm honest, as there was a little stringing visible at some areas but again I wouldn't blame the PLA. I was impressed as this is the first print without any post-processing needed to make it look presentable. Also I have experienced any issues with clogging, snapping or the feedOverall I would say at this price point this is a very good filament for those beginning to 3D print. The only changes I had to make to my print were the minimal at best and my overall impression is that a lot of effort has gone in to the product to be able to produce a good quality item at such a cheap price, that much so that I have now bought the Glow in the dark blue and the silk black to try, based on that It just worked, and prints come out as good as some much more expensive PLAs.

Very nice looking filament. It's a nice matte at 210 it has a little bit of shine at 200 it is more matte. Was able to pri t at 100mm/s on my Creality. Dry filament and the layers were flawless looking. Overall this is really up there with anything I have tested.

Nice rolls had no issue

I have been printing for 15 years+ and have used thousands of spools of material from numerous sources. This is by far the most brittle, as spooled, filament I have ever used. It is not due to excessive moisture. I have tried drying both spools for several hours, as well as small batch off spool. Getting use of more than about 25% of the spool is impossible as the bend radius on the spool at that point is too tight to un-spool without breaking , if you can manage to make use of even the first 25%. It prints a nice finish, IF you can get it to the hot end without breaking.

To start with the lighting for the pictures I shared are not representative of the color. It is far closer to an actual Terracotta. For some reason came out brownish in my pictures.I've always had a love hate relationship with Matte PLA. I love the look but matte Filaments never stick or are very brittle for me regardless of how much time I put into calibrating the printer for that matte. Usually end up having to raft in another filament and hot-swap to the matte.This on the other hands worked Flawlessly from the start. I was in a rush and just hit go not thinking about it being a matte. Come home to find it still attached to the build plate and looking amazing. Even running my standard PLA faster profile it came out relatively smooth but with layer lines still present, which I decided made it look closer to real brushed Terracotta. Continued printing till before I knew it the roll was gone. I run a 3D printing side business and knocked out several prints with this filament. some of the items I included with this review. Every person that stopped thought it was actually terracotta. This will be one of my go to Matte Filaments from now on. I've lost count of the ones I couldn't get printing right.

Das gelbe PLA-Filament hat mich mit seiner beeindruckenden Druckqualität und seiner zuverlässigen Leistung überzeugt. Die gedruckten Teile zeichnen sich durch eine glatte Oberfläche, feine Details und eine hervorragende Schichthaftung aus. Dank der gleichmäßigen Wicklung der Spule verläuft der Druckprozess reibungslos, und die konstante Konsistenz des Filamentdurchmessers ermöglicht eine gleichmäßige Extrusion. Es ist mit einer Vielzahl von 3D-Druckern kompatibel und somit eine hervorragende Wahl für alle Enthusiasten des 3D-Drucks. Ein unschlagbares Preis-Leistungsverhältnis!