CorsairHydro X Series, XL8, Performance Coolant, 1L, Clear

Works exactly as described. Have used multiple HydroX colors over the last few years. Color will fade slightly over time. But definitely gets your money worth for it.

I’ve been using Corsair’s coolant for years now and it’s definitely quality. I usually change my coolant once a year and this coolant holds up fantastic! It doesn’t separate in anyway, create sediment, change color or show any mold growth!! Whatever formula they use for these makes them last. Performance is great. I’ve tried other brands of coolant and did not notice any difference in cooling performance. So I mainly look for a coolant that won’t lose its color, breakdown and create particles or sediment that could clog water block fins and that can keep mold from growing and this checks all those boxes!!! Def buy this if you want a coolant that performs good and is relatively maintenance free for longer periods of time!!

Why did you pick this product vs others?:Excellent coolant. Very fetching. Effective cooling. Went with this coolant for my 2nd time filling. Last coolant had microparticles that were very aesthetically pleasing, but bound up and choked the pump. Did a full flush and refilled with this. No worries!

I had an old PC sitting in a closet with a custom loop that had the original EKWB coolant from almost 10 years ago. Flushed it and replaced with this coolant so I can use the PC again and it works great. The temperatures are the same as they were with the other coolant and it looks great in my setup. I only used about half of the bottle, but I'll definitely be purchasing again in the future.

Just as described no leakage and value for money and performance and quality and performance

The product works well. I originally used ek's cryofuel and I don't notice a difference in temperatures between the two. Colorwise, it originally looks more transparent but if you have rgb in your loop it can help "darken" the color more, I thought the purple would be darker, it is very transparent without any direct light on it. One thing to make sure is if you are storing it make sure it stays upright. I had it fully tightened but when I got to it it had leaked even though the cap was fully tightened.

Seems to be working well. I have an older Alienware Aurora R4 ALX that I bought off someone on Facebook. From what I understood was that the person kept it clean but that was it. So after buying paste and repasting the gtx970, I looked at the AIO cooler and felt the need to change the liquid too. Drained the old stuff, did the cleaning process, and filled with the hydro X. Definitely an improvement on my end. Temp is down by like -5°C max / -9°C idle. Used to be I couldn't leave the pc idle for more than 2 hours before the air felt like a dryer on the exhaust end. Now I've left it for 2 weeks on idle and temp has barely budged. As for longevity that will be a test of time, but certainly proved its cooling prowess thus far.

Works pefectly. Adds a nice look to my PC.